Triton Electronics manufacture a range of  instruments for use in determining filterability, thickenability and settling characteristics of sludges. We manufacture and sell Capillary Suction Time (CST), Stirred Specific Volume Index (SSVI) and other Wastewater equipment such as Laboratory flocculators, moisture analyser.

Triton Electronics, Bigods Hall, Dunmow

Capillary Suction Time has been used since the 1970s as a quick and reliable method for characterising sludge filterability and conditionability. It is sludge filterability that, predominantly, governs the output of nearly all the various types of dewatering equipment including: drying beds, belt press, vacuum filters, filter presses and centrifuges.
The capillary suction pressure generated by standard filter paper is used to ‘suck’ water from the sludge. The rate at which water permeates through the filter paper varies depending on the condition of the sludge and the filterability of the cake formed on the filter paper. The CST is obtained from two electrodes placed at a standard interval from the funnel. The time taken for the water front to pass between these two electrodes constitutes the CST.
The force generated by capillary suction is much greater than the hydrostatic head within the funnel, so the test is independent of the amount of sludge, as long as there is sufficient to generate the CST.
SSVI Equipment
The Stirred Specific Volume Index (SSVI) is used to determine the settling properties of an activated sludge. It is a simple test that is easy and quick to perform, and yet provides considerable information about the sludge settlement characteristics.
The SSVI can be used both in routine plant operation and it can be used for the design of a final sedimentation tank.


Hello Julian,

We SSVI test heads and 319 Power Supplies in stock. For the complete SSVI test set including column delivery is 2-3 weeks at the moment.

Kind regards,


Leave a Reply

Your email address will not be published. Required fields are marked *